Lumber mill site for sale – Sold as is / where is. -4 PIDs just over 25/- acres total. -Saw mill on site constructed in 1992 with 20 ceiling height – and average production of 70,000 board foot per day. Measurements are 39.7 x 121.5 13.6×22.11 20×29.2 (5518 sqft) -2 kilns with 55, 000 board feet capacity each on site. Kilns were built in 1992 and heated by wood chips from the boiler building on-site. -Office building is 1.5 storeys and is heated by electric heat. Measurements are 25×46 (plus 2 storey portion)(1916 sqft) -The planner Mill was built new in 2003. It features 19 ceilings, planer included is refurbished Yates A20. Measurements are 100.3×55.2 59.11×48.4 (8426 sqft). -The onsite garage is 30×70 with two 14 doors and 16 ceiling height. (2100 sqft) -The boiler building is 42x33jog for the shavings room, and is used for heating the kilns (1386 sqft) -The saw mill operation has not been operationally working since 2007. Only the boiler building has power connected. The other buildings have had power disconnected for a few years.